Morse Taper Adapter MT4 to B10 Morse Taper Sleeve Drill Chuck Adapter 4MT 10B

Description

Document
Drill Chuck Adapter MT4 to B10 for LathesThe Reason Choose Us:Drill chuck adapter made of good quality 45# steel Which is high hardness, good rust resistance long durability.With high accuracy, inside and outside are very smooth, good performance, long lasting time.Our taper drill sleeve after quenched, with high hardness and wear resistance, is not easy to break.Directly install and work perfectly, easy to install for everyone.The drill chuck adapter is widely used for drill, rocker shaft milling machines and lathe tailstock etc.Specification:​​​​Material: This drill chuck adapter is made from 45# steelHardness: between HRC48-53The accuracy: 0.02mmLong End (with Tang) is 4mt, Short End is 10BShank diameter: 10.1mm  Total length: 146mmPackage content:1pc MT4 to B10 drill chuck adapterNote:​​​​The drill chuck adapter we provide are for MT1-B10,MT1-B12,MT1-B16,MT1-B18,MT2-B10,MT2-B12,MT2-B16,MT2-B18,MT2-B22,MT3-B10,MT3-B12,MT3-B16,MT3-B18,MT3-B22,MT4-B10,MT4-B12,MT4-B16,MT4-B18,MT4-B22, Please pick what you need.
Taper Drill Sleeve MT3 to MT1 Morse Taper Reducing Adapter for Lathe Milling
USD
19.11
Taper Drill Sleeve MT4 to MT3 Morse Taper Reducing Adapter Middle Taper Sleeve
USD
21.2
Taper Drill Sleeve MT4 to MT2 Morse Taper Reducing Adapter for Lathe Milling
USD
27.3
Morse Taper Adapter MT4 to B18 Morse Taper Sleeve Drill Chuck Adapter 4MT 18B
USD
40.55
Morse Taper Adapter MT4 to B22 Morse Taper Sleeve Drill Chuck Adapter 4MT 22B
USD
41.9
Morse Taper Adapter MT4 to B16 Morse Taper Sleeve Drill Chuck Adapter 4MT 16B
USD
39.9
Morse Taper Adapter MT4 to B10 Morse Taper Sleeve Drill Chuck Adapter 4MT 10B
Drill Chuck Adapter MT4 to B10 for Lathes
The Reason Choose Us:
Drill chuck adapter made of good quality 45# steel Which is high hardness, good rust resistance long durability.
With high accuracy, inside and outside are very smooth, good performance, long lasting time.
Our taper drill sleeve after quenched, with high hardness and wear resistance, is not easy to break.
Directly install and work perfectly, easy to install for everyone.
The drill chuck adapter is widely used for drill, rocker shaft milling machines and lathe tailstock etc.
Specification:
​​​​Material: This drill chuck adapter is made from 45# steel
Hardness: between HRC48-53
The accuracy: 0.02mm
Long End (with Tang) is 4mt, Short End is 10B
Shank diameter: 10.1mm  Total length: 146mm
Package content:1pc MT4 to B10 drill chuck adapter
Note:
​​​​The drill chuck adapter we provide are for MT1-B10,MT1-B12,MT1-B16,MT1-B18,MT2-B10,MT2-B12,MT2-B16,MT2-B18,MT2-B22,MT3-B10,MT3-B12,MT3-B16,MT3-B18,MT3-B22,MT4-B10,MT4-B12,MT4-B16,MT4-B18,MT4-B22, Please pick what you need.
Hot Item
MT4 to MT3 Morse Taper Adapter Reducing Drill Sleeve Morse Center Sleeve
USD 19.17
Taper Drill Sleeve MT3 to MT2 Morse Taper Reducing Adapter for Lathe Milling
USD 15.66
Drill Chuck Adapter MT1 to B18 Taper Shank Sleeve Morse Taper 1MT 18B Adapter
USD 12.68
MT3 to MT2 Reducing Drill Sleeve Morse Taper Adapter for Lathe Milling
USD 14.78
Morse Taper Adapter MT4 to B12 Morse Taper Sleeve Drill Chuck Adapter 4MT 12B
USD 38.97
Payment
We ONLY accept Paypal.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
Description
Policy
Morse Taper Adapter MT4 to B10 Morse Taper Sleeve Drill Chuck Adapter 4MT 10B
Drill Chuck Adapter MT4 to B10 for Lathes
The Reason Choose Us:
Drill chuck adapter made of good quality 45# steel Which is high hardness, good rust resistance long durability.
With high accuracy, inside and outside are very smooth, good performance, long lasting time.
Our taper drill sleeve after quenched, with high hardness and wear resistance, is not easy to break.
Directly install and work perfectly, easy to install for everyone.
The drill chuck adapter is widely used for drill, rocker shaft milling machines and lathe tailstock etc.
Specification:
​​​​Material: This drill chuck adapter is made from 45# steel
Hardness: between HRC48-53
The accuracy: 0.02mm
Long End (with Tang) is 4mt, Short End is 10B
Shank diameter: 10.1mm  Total length: 146mm
Package content:1pc MT4 to B10 drill chuck adapter
Note:
​​​​The drill chuck adapter we provide are for MT1-B10,MT1-B12,MT1-B16,MT1-B18,MT2-B10,MT2-B12,MT2-B16,MT2-B18,MT2-B22,MT3-B10,MT3-B12,MT3-B16,MT3-B18,MT3-B22,MT4-B10,MT4-B12,MT4-B16,MT4-B18,MT4-B22, Please pick what you need.
Taper Drill Sleeve MT3 to MT1 Morse Taper Reducing Adapter for Lathe Milling
USD
19.11
Taper Drill Sleeve MT4 to MT3 Morse Taper Reducing Adapter Middle Taper Sleeve
USD
21.2
Taper Drill Sleeve MT4 to MT2 Morse Taper Reducing Adapter for Lathe Milling
USD
27.3
Morse Taper Adapter MT4 to B18 Morse Taper Sleeve Drill Chuck Adapter 4MT 18B
USD
40.55
Morse Taper Adapter MT4 to B22 Morse Taper Sleeve Drill Chuck Adapter 4MT 22B
USD
41.9
Morse Taper Adapter MT4 to B16 Morse Taper Sleeve Drill Chuck Adapter 4MT 16B
USD
39.9
Hot Item
MT4 to MT3 Morse Taper Adapter Reducing Drill Sleeve Morse Center Sleeve
USD 19.17
Taper Drill Sleeve MT3 to MT2 Morse Taper Reducing Adapter for Lathe Milling
USD 15.66
Drill Chuck Adapter MT1 to B18 Taper Shank Sleeve Morse Taper 1MT 18B Adapter
USD 12.68
MT3 to MT2 Reducing Drill Sleeve Morse Taper Adapter for Lathe Milling
USD 14.78
Morse Taper Adapter MT4 to B12 Morse Taper Sleeve Drill Chuck Adapter 4MT 12B
USD 38.97
Payment
We ONLY accept Paypal.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
On Mar-26-22 at 03:25:12 PDT, seller added the following information: