-40%
Sherline 1/4 in Tailstock Chuck & Key 1072

Sherline 1/4 in Tailstock Chuck & Key 1072

$ 35.87

Availability: 42 in stock
  • Brand: Sherline
  • Suitable For: Metal
  • Model: 1072
  • Type: Lathes Accessories
  • Item must be returned within: 30 Days
  • Restocking Fee: No
  • California Prop 65 Warning: CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance know to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection.

    I can do all this through him who gives me strength. Philippians 4:13
  • Country/Region of Manufacture: United States
  • Refund will be given as: Money Back
  • Condition: New
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • MPN: Does Not Apply

    Description

    Sherline 1/4 in Tailstock Chuck & Key 1072
    Sherline drill chuck is probably the most important accessory you will need for your lathe. It will enable you to accurately centerline drill, ream, or tap any part mounted on the lathe.
    The part to be machined is chuck or collet mounted in the headstock. The tool is mounted in the tailstock chuck and fed into the part using the tailstock ram feed. Parts that are going to be mounted between centers can be center drilled this way. Other parts requiring a hole accurately drilled on center on center can also e machined this way.
    These chucks can also be mounted in the headstock of the lathe.
    The Sherline tailstock chuck (P/N 1072) is a precision 1/32" lathe (.8mm) to 1/4" (6.4mm) 3-jaw Jacobs chuck with key, drawbolt and two arbors. A #0 Morse arbor fits the tailstock and a #1 Morse arbor fits the headstock. When ordering the model 4000A or 4500A/4530A, the 1/4" tailstock chuck and key (P/N1072 is included