-40%
Sherline 35° Insert Right-hand Holder 2256
Sherline 35° Insert Right-hand Holder 2256

Sherline 35° Insert Right-hand Holder 2256

$ 29.01

Availability: 100 in stock
  • Type: Lathes Accessories
  • California Prop 65 Warning: CA Prop 65 WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use dust mask or other safeguards for personal protection. I can do all this through him who gives me strength. Philippians 4:13
  • Country/Region of Manufacture: United States
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • MPN: Does Not Apply
  • Return shipping will be paid by: Buyer
  • Model: 2256
  • Suitable For: Metal
  • All returns accepted: Returns Accepted
  • Condition: New
  • Restocking Fee: No
  • Brand: Sherline

    Description

    Sherline 35° Insert Right-hand Holder 2256
    Sherline now manufactures its own inserted tip carbide tool holders. They are available individually as a right-hand holder (P/N 2256) or a left-hand holder (P/N 2257). The pair of RH and LH is P/N 2258.
    Each comes with a P/N 7605 55° carbide insert, hold-down screw and special Torx key. The 3/8" square shank is held in a P/N 7600 tool post. The 35° offset angle of the tip makes it easier to accomplish certain cuts.
    For example, by using the tool holder square with the crosslide, you can turn an O.D. up to a shoulder and then finish the shoulder by backing the tool out while still maintaining the proper tool clearance.
    The tip of the cutting tool is .375" from the bottom of the holder, which is the industry standard. The holders are made from case hardened steel with a black oxide finish.
    Though relatively expensive, if a cutting edge becomes dull or chipped, the insert can be removed and rotated 180° to expose two new cutting surfaces, providing, in effect, two tools for the price of one.
    The primary method of cutting metal on miniature machine tools is usually with high speed steel tools as they are inexpensive, easily resharpened and can be ground into "form" tools for special jobs. However, inserted tip carbide tools can be lifesavers for some jobs. Though more expensive and not able to be resharpened, carbide tools hold their cutting edge when cutting exotic metals or abrasive materials and can speed up the cutting process. This is why they are used for most cutting tasks in the modern professional machine shop.